Print Report | Back to Sample Detail

Sample Record for 2024-12-10-86

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212246 DEA: 053307A4 EFIS: 0514000027 QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO-46-49.7/54.6
Work Description: Cholame Segment
Location Description:
Contractor Name: Atkinson Construction
Contractor Address: 18201 Von Karman - Suite 800, Irvine, CA 92612
Resident Engineer: Andrew Borrelli Structure Rep.: Dave Lewis

Sample Information

DIME Sample ID: 2024-12-10-86
TL Number from the TL Form:
Sample Submitted By Organization: CT D05 - Whitley Gardens Field Laboratory
Sample Organization Contact: 805-540-9933
Type of Sample: Dispute Resolution
Type of Material: Hot Mix Asphalt
Sample Taken Date: 12/10/2024
Date that the sample was received by the laboratory/organization performing the testing: 02/25/2025
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 1/2" HMA-A 15% RAP & LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 241210 L4 SL2
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sierra Pacific Materials - Avenal

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number: 4
Sublot number: 2
HMA Mix Number: L223535A
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 0

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2024-12-10-86-1CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt02/25/2025Not scheduledKyle EngenCT D01 - District 1 Materials Laboratory
2024-12-10-86-2AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)02/25/2025Not scheduledKyle EngenCT D01 - District 1 Materials Laboratory
2024-12-10-86-3AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)02/25/2025Not scheduledKyle EngenCT D01 - District 1 Materials Laboratory