Print Report | Back to Sample Detail

Sample Record for 2025-02-19-5

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000115 DEA: 060Y7604 EFIS: 0619000024 QA Service Level: 1
DIST-CO-RTE-PM: 06-FRE-L5506,L5725-
Work Description: MODIFICATION OF ELECTRICAL SYSTEM.
Location Description: FRESNO COUNTY IN FRESNO AT THE WEST AVENUE MAINTENANCE STATION 1283 NORTH WEST AVENUE AND AT THE DISTRICT OFFICE 1352 WEST OLIVE AVENUE
Contractor Name: NENAD RADMANOVIC DBA RADMAN ELECTRIC
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-02-19-5
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Millbrook Field Laboratory
Sample Organization Contact: (559) 341-3953
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 02/19/2025
Date that the sample was received by the laboratory/organization performing the testing: 02/19/2025
The quantity of what the sample constitutes: 64 tons
A brief description of the sample: 1/2 HMA
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: vulcan materials

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number: 1
Sublot number: 1
HMA Mix Number:
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2025-02-19-5-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 02/20/2025
Date Tested: 02/19/2025
Submitted By Organization: CT D06 - Millbrook Field Laboratory
Organization Address: 1352 W. Olive Ave,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93728
Organization Email: tomas.silva@dot.ca.gov
Organization Phone: (559) 417-5341
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 3973.6 g
Mass of the specimen and specimen basket assembly prior to ignition 5580.4 g
Mass of HMA Sample prior to ignition 1606.8 g
Corrected Asphalt Binder Content 4.66 %
Mass Loss 76.8 g
Mass of aggregate remaining after ignition 1530 g
Correction Factor (Percent by mass of HMA Specimen) 0.12 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 C