Print Report | Back to Sample Detail

Sample Record for 2024-12-27-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-12-27-4
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Stock
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 12/27/2024
Date that the sample was received by the laboratory/organization performing the testing: 01/08/2025
The quantity of what the sample constitutes: 500
A brief description of the sample: A325 Bolt 1.50 x 4.50
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Gaffney Bolt

Material Information

Rocap Number(s):
Heat Number(s): 20957440
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s):
Bolt Specification: A325
Bolt Length(s): 4.5"
Nut Specification: na
Washer Specification: na
Finish: hdg
Diameter/Size: 1.5"
Bolt Mfg. Lot Number: 10356
Rocap Test Requirement(s):
Lubricant Requirements(s):
Washer Inner Diameter(s):
Test results on following page(s): 9

Test Results

Test 1 of 9

DIME Test ID: 2024-12-27-4-1
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 02/03/2025
Date Tested: 01/13/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 20957440
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size 1.5 in
Bolt Length 4.5 in
Pitch Diameter 1.3851 in
Pitch Diameter 2nd no data in

Test 2 of 9

DIME Test ID: 2024-12-27-4-2
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 02/03/2025
Date Tested: 01/13/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) 20957440
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size 1.5 in
Bolt Length 4.5 in
Pitch Diameter 1.3882 in
Pitch Diameter 2nd no data in

Test 3 of 9

DIME Test ID: 2024-12-27-4-3
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 02/03/2025
Date Tested: 01/13/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) 20957440
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size 1.5 in
Bolt Length 4.5 in
Pitch Diameter 1.3830 in
Pitch Diameter 2nd no data in

Test 4 of 9

DIME Test ID: 2024-12-27-4-4
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/03/2025
Date Tested: 01/13/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 20957440
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size 1.5 in
Bolt Length 4.5 in
Measurement Average 2.9 mils

Test 5 of 9

DIME Test ID: 2024-12-27-4-5
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/03/2025
Date Tested: 01/13/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) 20957440
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size 1.5 in
Bolt Length 4.5 in
Measurement Average 3.3 mils

Test 6 of 9

DIME Test ID: 2024-12-27-4-6
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/03/2025
Date Tested: 01/13/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) 20957440
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size 1.5 in
Bolt Length 4.5 in
Measurement Average 3.2 mils

Test 7 of 9

DIME Test ID: 2024-12-27-4-7
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 02/03/2025
Date Tested: 01/13/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 20957440
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size 1.5 in
Bolt Length 4.5 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.3
Spacing Ok

Test 8 of 9

DIME Test ID: 2024-12-27-4-8
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 02/03/2025
Date Tested: 01/13/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) 20957440
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size 1.5 in
Bolt Length 4.5 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.7
Spacing Ok

Test 9 of 9

DIME Test ID: 2024-12-27-4-9
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 02/03/2025
Date Tested: 01/13/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) 20957440
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size 1.5 in
Bolt Length 4.5 in
Hardness Reading Scale C Scale
Hardness Reading Average 27.7
Spacing Ok