Sample Record for 2017-05-04-3
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 210041 DEA: 043G4864 EFIS: 0412000086
QA Service Level: 1
DIST-CO-RTE-PM: 04-SM-92-14.4/18.8
Work Description: CLEAN AND PAINT STRUCTURAL STEEL ON BRIDGE
Location Description: IN SAN MATEO AND ALAMEDA COUNTIES ON ROUTE 92 AT SAN MATEO HAYWARD
Contractor Name: LIBERTY MAINTENANCE, INC.
Contractor Address: 777 N. Meridian Rd., Youngstown, OH 44509
Resident Engineer: Minh Hinh Structure Rep.: Bryan Chew
Sample Information
DIME Sample ID: 2017-05-04-3
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 05/04/2017
Date that the sample was received by the laboratory/organization performing the testing: 05/05/2017
The quantity of what the sample constitutes: 1 lot
A brief description of the sample: 1 x 3 and 5 1/2 A325 Bolts
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Pacific Bolt
Material Information
Rocap Number(s): L1411736, L1412103, L1412075
Heat Number(s): DL166100846, 10402480, 100885294
Nut Mfg. Lot Number(s): 24618-166642
Washer Mfg. Lot Number(s): D2553
Bolt Specification: A325
Bolt Length(s): 1 x 3, and 1x 5-1/2 (2 heats)
Nut Specification: A563
Washer Specification: F436
Finish: MG
Diameter/Size: 1"
Bolt Mfg. Lot Number: 380950A, 759024Z, 388587A
Rocap Test Requirement(s):
Lubricant Requirements(s):
Test Results
Test 1 of 25
DIME Test ID: 2017-05-04-3-1
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
L1411736
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
380950A
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 N
|
Size
|
1 in
|
Bolt Length
|
3 in
|
Gage Type
|
Pass
|
Test 2 of 25
DIME Test ID: 2017-05-04-3-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
2A
|
Rocap Number
|
L1412103
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
388587A
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 N
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Gage Type
|
Pass
|
Test 3 of 25
DIME Test ID: 2017-05-04-3-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3A
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
759024Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 LE USA
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Gage Type
|
Pass
|
Test 4 of 25
DIME Test ID: 2017-05-04-3-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3B
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
759024Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 LE USA
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Gage Type
|
Pass
|
Test 5 of 25
DIME Test ID: 2017-05-04-3-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3C
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
759024Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 LE USA
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Gage Type
|
Pass
|
Test 6 of 25
DIME Test ID: 2017-05-04-3-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
L1411736
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
380950A
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 N
|
Size
|
1 in
|
Bolt Length
|
3 in
|
Measurement Average
|
4.48 mils
|
Test 7 of 25
DIME Test ID: 2017-05-04-3-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
2A
|
Rocap Number
|
L1412103
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
388587A
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 N
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Measurement Average
|
7.49 mils
|
Test 8 of 25
DIME Test ID: 2017-05-04-3-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3A
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
759024Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 LE USA
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Measurement Average
|
3.34 mils
|
Test 9 of 25
DIME Test ID: 2017-05-04-3-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3B
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
759024Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 LE USA
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Measurement Average
|
3.76 mils
|
Test 10 of 25
DIME Test ID: 2017-05-04-3-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3C
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
759024Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 LE USA
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Measurement Average
|
4.04 mils
|
Test 11 of 25
DIME Test ID: 2017-05-04-3-11
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
L1411736
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
380950A
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 N
|
Size
|
1 in
|
Bolt Length
|
3 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
30.82
|
Spacing
|
Ok
|
Test 12 of 25
DIME Test ID: 2017-05-04-3-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3A
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
24618-166642Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
DH U
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Measurement Average
|
2.55 mils
|
Test 13 of 25
DIME Test ID: 2017-05-04-3-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3B
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
24618-166642Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
DH U
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Measurement Average
|
2.88 mils
|
Test 14 of 25
DIME Test ID: 2017-05-04-3-14
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3C
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
24618-166642Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
DH U
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.52 mils
|
Test 15 of 25
DIME Test ID: 2017-05-04-3-15
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3A
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
D2553
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 P
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.45 mils
|
Test 16 of 25
DIME Test ID: 2017-05-04-3-16
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3B
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
D2553
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 P
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.7 mils
|
Test 17 of 25
DIME Test ID: 2017-05-04-3-17
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3C
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
D2553
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 P
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.65 mils
|
Test 18 of 25
DIME Test ID: 2017-05-04-3-18
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3A
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
24618-166642Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
DH U
|
Size
|
1 in
|
Gage Type
|
Pass
|
Test 19 of 25
DIME Test ID: 2017-05-04-3-19
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3B
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
24618-166642Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
DH U
|
Size
|
1 in
|
Gage Type
|
Pass
|
Test 20 of 25
DIME Test ID: 2017-05-04-3-20
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3C
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
24618-166642Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
DH U
|
Size
|
1 in
|
Gage Type
|
Pass
|
Test 21 of 25
DIME Test ID: 2017-05-04-3-21
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3A
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
D2553
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 P
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
42
|
Spacing
|
Ok
|
Test 22 of 25
DIME Test ID: 2017-05-04-3-22
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/10/2017
Date Tested: 05/08/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
3B
|
Rocap Number
|
L1412075
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
D2553
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 P
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
39.75
|
Spacing
|
Ok
|
Test 23 of 25
DIME Test ID: 2017-05-04-3-23
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 05/10/2017
Date Tested: 05/09/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | 2A | B362-044-17 | 1\" | 91453 | 406.8 | 10 | A325 | Arnold |
| |
UTM
|
400KIP
|
Temperature
|
no data
|
Test 24 of 25
DIME Test ID: 2017-05-04-3-24
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 05/10/2017
Date Tested: 05/09/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | 3A | B362-044-17 | 1\" | 89841 | 399.6 | 10 | A325 | Arnold |
| |
UTM
|
400KIP
|
Temperature
|
no data
|
Test 25 of 25
DIME Test ID: 2017-05-04-3-25
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 05/10/2017
Date Tested: 05/09/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | 3A | B362-044-17 | 1\" | 93182 | 414.49 | | Arnold |
| |
UTM
|
400KIP
|
Temperature
|
71 F
|