Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994686 DEA: 051K4604 EFIS: 0518000210
QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO-46-29.7/32.2
Work Description: COLD PLANE, PLACE HMA, RHMA, CONC PVMT, MODIFY SIGNAL AND LIGHTING.
Location Description: SAN LUIS OBISPO COUNTY IN PASO ROBLES FROM 300 FEET WEST OF ROUTE 101/46 SEPARATION TO 0.1 MILE EAST OF AIRPORT ROAD
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: 800 FARROLL RD, GROVER BEACH, CA 93433
Resident Engineer: Michael Schmidt Structure Rep.: Ray Barajas
DIME Sample ID: 2024-06-25-153
TL Number from the TL Form:
Sample Submitted By Organization: CT D05 - Paso Robles Field Laboratory
Sample Organization Contact: 1 (209) 610-9363
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/25/2024
Date that the sample was received by the laboratory/organization performing the testing: 06/24/2024
The quantity of what the sample constitutes: 250T
A brief description of the sample: HMA compaction core
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: PAPICH
DIME Test ID: 2024-06-25-153-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 12/16/2024
Date Tested: 06/25/2024
Submitted By Organization: CT D05 - Paso Robles Field Laboratory
Organization Address: CA,
Organization City: ,
Organization State: CA
Organization Zipcode: 93422
Organization Email: isaac.larey.chezem@dot.ca.gov
Organization Phone: (805) 234-6493
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of Samples
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
no data
|
|
Mass of container filled with water 1
|
7331.2 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
2578.9 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8836.3 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.402
|
|
Theoretical maximum density at 25°C (77°F)
|
149.5 lb/ft^3
|
DIME Test ID: 2024-06-25-153-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 12/16/2024
Date Tested: 06/25/2024
Submitted By Organization: CT D05 - Paso Robles Field Laboratory
Organization Address: CA,
Organization City: ,
Organization State: CA
Organization Zipcode: 93422
Organization Email: isaac.larey.chezem@dot.ca.gov
Organization Phone: (805) 234-6493
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.232
|
