Print Report | Back to Sample Detail

Sample Record for 2024-12-13-14

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 211605 DEA: 043G4444 EFIS: 0412000044 QA Service Level: 1
DIST-CO-RTE-PM: 04-SF-80-5.9/7.7
Work Description: SFOBB WEST SPAN MAIN CABLE WRAP. Repair main cable and replace suspender ropes, and tower access doors.
Location Description: THE CITY AND COUNTY OF SAN FRANCISCO AT VARIOUS LOCATIONS FROM 0.1 MILE NORTH OF SAN FRANCISCO ANCHORAGE TO 0.1 MILE SOUTH OF YERBA BUENA ANCHORAGE
Contractor Name: American Bridge Company (Wade Barie)
Contractor Address: 1000 American Bridge Way, Coraopolis, PA 15108
Resident Engineer: Daniel Guzman Structure Rep.: Sergio Gomez

Sample Information

DIME Sample ID: 2024-12-13-14
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM8 - Welded Wire Mesh
Sample Taken Date: 12/13/2024
Date that the sample was received by the laboratory/organization performing the testing: 12/16/2024
The quantity of what the sample constitutes: NA
A brief description of the sample: Welded Wire
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Wireco

Material Information

Wire Heat Number(s): 641507
Epoxy Batch Number (NA if not epoxy Coated): NA
Wire Mesh Specification: ASTM A1064
Size Number for Major Wire: 0.196
Size Number for Minor Wire: 0.196
Mesh Dimensions: NA
Epoxy Coating or Galvanizing Specification (NA for no coating): NA
Epoxy Coating Coating Color (NA for galvanizing or no coating): NA
Wire Manufacturer: Wireco
Wire Coater/Galvanizer (NA for no coating): NA
Epoxy Powder Manufacturer (NA for galvanizing or no coating): NA
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2024-12-13-14-1
Test Method: ASTM A1064-18: Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete (Weld Shear)
Verified Date: 02/05/2025
Date Tested: 01/20/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Wire Mesh Samples Tested 4
Large Wire Area (insqr)Heat NumberPeak Load (lbf)Comments
0.03024R6415077506Broke in Wire
0.03024R6415077472Broke in Wire
0.03024R6415077378Broke in Wire
0.03024R6415077534Broke in Wire
UTM NA
Temperature 0 f