Print Report | Back to Sample Detail

Sample Record for 2024-12-03-54

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214649 DEA: 07316004 EFIS: 0715000194 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-14-60.70
Work Description: REHABILITATION FOR THE ON/OFF RAMPS AND ADJACENT SHOULDERS. UPGRADING METAL BEAM GUARDRAILS, AC DIKES, SIGN PANELS, CURB RAMPS, TRAFFIC LOOPS DETECTORS, AND SOME OTHER HIGHWAY APPURTENANCES.
Location Description: ROUTE 14 FROM PALMDALE BLVD TO KERN COUNTRY LINE.
Contractor Name: Guy F. Atkinson Construction LLC
Contractor Address: 18201 Von Karman Ave, Suite 800, Irvine, CA 92612
Resident Engineer: James Shih Structure Rep.: Hossein Sabbagh

Sample Information

DIME Sample ID: 2024-12-03-54
TL Number from the TL Form:
Sample Submitted By Organization: Alta Vista Solutions - Whittier
Sample Organization Contact: (510) 542-9827
Type of Sample: Quality Assurance
Type of Material: Concrete
Sample Taken Date: 12/03/2024
Date that the sample was received by the laboratory/organization performing the testing: 12/03/2024
The quantity of what the sample constitutes: 195 CY
A brief description of the sample: 6 x 12 LCB Cylinders
From where was the sample collected: Job Site
Laboratory sample identification: 24-3746-3747-3748
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: N/A

Material Information

The concrete mix design number: 12622-LCB-1
The truck number from where the sample was collected: Load 19 Truck 70
The batch plant ticket number from where the sample was collected: NA
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: Jobsite
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2024-12-03-54-1
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Verified Date: 12/13/2024
Date Tested: 12/10/2024
Submitted By Organization: Alta Vista Solutions - Whittier
Organization Address: 12409 Slauson Avenue, Suite I,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90606
Organization Email: nicholas.hoffmann@oneatlas.com
Organization Phone: (510) 542-9827
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 6
Test performed With no density determined
Capped in accordance with? ASTM C1231 - Unbonded Elastomeric Pad Cap
Average diameter of cylinder 1 5.95 in
Average diameter of cylinder 2 5.95 in
Average diameter of cylinder 3 5.95 in
Average diameter of cylinder 4 5.95 in
Average diameter of cylinder 5 5.95 in
Average diameter of cylinder 6 5.95 in
Cross sectional area of cylinder 1 27.81 in^2
Cross sectional area of cylinder 2 27.81 in^2
Cross sectional area of cylinder 3 27.81 in^2
Cross sectional area of cylinder 4 27.81 in^2
Cross sectional area of cylinder 5 27.81 in^2
Cross sectional area of cylinder 6 27.81 in^2
Compressive strength (to nearest 10 psi) 830 psi
Maximum load on cylinder 1 22933 lb
Maximum load on cylinder 2 23078 lb
Maximum load on cylinder 3 22743 lb
Maximum load on cylinder 4 23363 lb
Maximum load on cylinder 5 22636 lb
Maximum load on cylinder 6 23857 lb
Compressive strength of cylinder 1 824.6 psi
Type of fracture pattern of cylinder 1 3
Compressive strength of cylinder 2 829.8 psi
Compressive strength of cylinder 3 817.8 psi
Compressive strength of cylinder 4 840.1 psi
Compressive strength of cylinder 5 814 psi
Compressive strength of cylinder 6 857.9 psi
Type of fracture pattern of cylinder 2 3
Type of fracture pattern of cylinder 3 3
Type of fracture pattern of cylinder 4 3
Type of fracture pattern of cylinder 5 3
Type of fracture pattern of cylinder 6 3
Comment on any defect in either specimen or caps (Max 250 Characters) no data
Correction factor for cylinder 1 1
Correction factor for cylinder 2 1
Correction factor for cylinder 3 1
Correction factor for cylinder 4 1
Correction factor for cylinder 5 1
Correction factor for cylinder 6 1
Age of specimen 7 days
Age of specimen in hours no data0 hours