Sample Record for 2024-12-11-22
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 995495 DEA: 101C2704 EFIS: 1014000097
QA Service Level: 1
DIST-CO-RTE-PM: 10-STA-5-27.1
Work Description: REPLACE SAFETY ROADSIDE REST AREA.
Location Description: STATE HIGHWAY IN STANISLAUS COUNTY ABOUT 1.0 MILE SOUTH OF SAN JOAQUIN COUNTY LINE AT THE WESTLEY SAFETY ROADSIDE REST AREA
Contractor Name: TSI ENGINEERING, INC.
Contractor Address: 4600 Roseville Road, Suite140, North Highland, CA 95660
Resident Engineer: Zubair Anwar Structure Rep.: Sai Kasaraneni
Sample Information
DIME Sample ID: 2024-12-11-22
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 12/11/2024
Date that the sample was received by the laboratory/organization performing the testing: 12/17/2024
The quantity of what the sample constitutes: 7
A brief description of the sample: ASTM A325 .625" X 2" HS Cap Screws
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: KW Industries
Material Information
Rocap Number(s): N/A
Heat Number(s): 1000117721
Nut Mfg. Lot Number(s): N/A
Washer Mfg. Lot Number(s): N/A
Bolt Specification: ASTM F3125, A325
Bolt Length(s): 2"
Nut Specification: N/A
Washer Specification: N/A
Finish: HDG - Lubricated
Diameter/Size: .625"
Bolt Mfg. Lot Number: W000011176
Rocap Test Requirement(s):
Lubricant Requirements(s): Required
Washer Inner Diameter(s):
Test Results
Test 1 of 3
DIME Test ID: 2024-12-11-22-1
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 01/17/2025
Date Tested: 01/17/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
W000011176
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
.625 in
|
|
Bolt Length
|
2 in
|
|
Pitch Diameter
|
0.5743 in
|
|
Pitch Diameter 2nd
|
no data in
|
Test 2 of 3
DIME Test ID: 2024-12-11-22-2
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/17/2025
Date Tested: 01/17/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
W000011176
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
.625 in
|
|
Bolt Length
|
2 in
|
|
Measurement Average
|
4.6 mils
|
Test 3 of 3
DIME Test ID: 2024-12-11-22-3
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/17/2025
Date Tested: 01/17/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
W000011176
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
.625 in
|
|
Bolt Length
|
2 in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
30.2
|
|
Spacing
|
Ok
|
