Sample Record for 2024-12-10-34
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 209698 DEA: 072332E4 EFIS: 0700000391 COOP: 0705187
QA Service Level: 2
DIST-CO-RTE-PM: 07-LA-I-5-45.4/54
Work Description: Addition of 14 miles of HOV lanes in both directions would extend existing carpool lanes on the I- 5 in San Fernando Valley to Santa Clarita Valley
Location Description: The I-5 North Capacity Enhancements Project focuses on improvements to the I-5 freeway from cities of Santa Clarita and Castaic, beginning at the SR-14 interchange to Parker Rd.
Contractor Name: OHLA USA
Contractor Address: Unknown
Resident Engineer: James Shih Structure Rep.: Chanh Tong
Sample Information
DIME Sample ID: 2024-12-10-34
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Production Start-Up
Type of Material: Aggregate
Sample Taken Date: 12/10/2024
Date that the sample was received by the laboratory/organization performing the testing: 12/12/2024
The quantity of what the sample constitutes: 4 Bags comb agg(3/4,1/2,3/8 state sand), 2 Rap
A brief description of the sample: 3/4" WMA A SP R25 0.50% EVO
From where was the sample collected: Manufacturer
Laboratory sample identification: 0674A-24
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan-Sun Valley
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-19-0035
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: INGEVITY, VALERO,FISH CYN IRWINDALE, VULCAN VA
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: 220200W SVA VLO
Lot number:
Sublot number:
Aggregate Mix Number:
Test Results
Tests Assigned to this Sample
| DIME Test ID | Test Method | Assigned Date | Test Date | Assigned By | Assigned Lab | Test Comments | Assigned To |
| 2024-12-10-34-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | 12/12/2024 | Not scheduled | Amir Sarder | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-12-10-34-2 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | 12/12/2024 | Not scheduled | Amir Sarder | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-12-10-34-3 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | 12/12/2024 | Not scheduled | Amir Sarder | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-12-10-34-4 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | 12/12/2024 | Not scheduled | Amir Sarder | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-12-10-34-5 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | 12/12/2024 | Not scheduled | Amir Sarder | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-12-10-34-6 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | 12/12/2024 | Not scheduled | Amir Sarder | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-12-10-34-7 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | 12/12/2024 | Not scheduled | Amir Sarder | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-12-10-34-8 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | 12/12/2024 | Not scheduled | Amir Sarder | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-12-10-34-9 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | 12/12/2024 | Not scheduled | Amir Sarder | CT D08 - Fontana Southern Regional Laboratory | | |
122735122736122737122738122739122740122741122742122743
