Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993870 DEA: 120R5604 EFIS: 1218000117
QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-5,55,73,91,133,405-var
Work Description: PLACE RHMA-G, HMA, SLAB REPLACEMENT AND JPCP.
Location Description: ORANGE COUNTY AT VARIOUS LOCATIONS
Contractor Name: SECURITY PAVING COMPANY INC.
Contractor Address: 3075 Towngate Road, St. 200, Westlake Village, CA 91361
Resident Engineer: Roy Rivera Structure Rep.: Vian Ghazi
DIME Sample ID: 2024-12-04-35
TL Number from the TL Form:
Sample Submitted By Organization: CT D12 - Huntington Beach Field Laboratory
Sample Organization Contact: 9492798846
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 12/04/2024
Date that the sample was received by the laboratory/organization performing the testing: 12/04/2024
The quantity of what the sample constitutes: 3/4 RHMAG
A brief description of the sample: 3/4 RHMAG
From where was the sample collected: Manufacturer
Laboratory sample identification: 24-1124
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AAA Corona
DIME Test ID: 2024-12-04-35-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 01/28/2025
Date Tested: 01/16/2025
Submitted By Organization: CT D12 - Huntington Beach Field Laboratory
Organization Address: 19601 Beach Boulevard,
Organization City: Huntington Beach
Organization State: CA
Organization Zipcode: 92648
Organization Email: frank.mai@dot.ca.gov
Organization Phone: (949) 279-8846
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of the specimen basket assembly
|
3950 g
|
|
Mass of the specimen and specimen basket assembly prior to ignition
|
5953.1 g
|
|
Mass of HMA Sample prior to ignition
|
2003.1 g
|
|
Corrected Asphalt Binder Content
|
6.06 %
|
|
Mass Loss
|
122.6 g
|
|
Mass of aggregate remaining after ignition
|
1880.5 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.06 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
no data0 %
|
|
Test Temperature
|
538 C
|
DIME Test ID: 2024-12-04-35-2
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 01/28/2025
Date Tested: 01/16/2025
Submitted By Organization: CT D12 - Huntington Beach Field Laboratory
Organization Address: 19601 Beach Boulevard,
Organization City: Huntington Beach
Organization State: CA
Organization Zipcode: 92648
Organization Email: frank.mai@dot.ca.gov
Organization Phone: (949) 279-8846
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of Samples
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of container filled with water 1
|
7309 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
2512.5 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8816.7 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.5
|
|
Theoretical maximum density at 25°C (77°F)
|
155.6 lb/ft^3
|
DIME Test ID: 2024-12-04-35-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 01/28/2025
Date Tested: 01/16/2025
Submitted By Organization: CT D12 - Huntington Beach Field Laboratory
Organization Address: 19601 Beach Boulevard,
Organization City: Huntington Beach
Organization State: CA
Organization Zipcode: 92648
Organization Email: frank.mai@dot.ca.gov
Organization Phone: (949) 279-8846
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.291
|
