Print Report | Back to Sample Detail

Sample Record for 2024-10-22-68

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 995119 DEA: 034H6004 EFIS: 0319000004 QA Service Level: 1
DIST-CO-RTE-PM: 03-PLA-49-R8.7/R10.6
Work Description: CONC BARRIER, JPCP, HMA, RDWY EXC, RCP AND LIGHTING.
Location Description: PLACER COUNTY NEAR AUBURN FROM 0.3 MILE SOUTH OF LORENSEN ROAD/FLORENCE LANE TO 0.4 MILE NORTH OF LONE STAR ROAD
Contractor Name: DESILVA GATES CONSTRUCTION, LLC
Contractor Address: Unknown
Resident Engineer: Jeff Johnson Structure Rep.: Asia Al Maliki

Sample Information

DIME Sample ID: 2024-10-22-68
TL Number from the TL Form:
Sample Submitted By Organization: Blackburn Consulting
Sample Organization Contact: (916) 375-8706
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 10/22/2024
Date that the sample was received by the laboratory/organization performing the testing: 10/22/2024
The quantity of what the sample constitutes: 2 Boxes
A brief description of the sample: 3/4" HMA w/ 25% RAP
From where was the sample collected: Source
Laboratory sample identification: 4526
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: DeSilva Gates

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 4
HMA Mix Number:
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2024-10-22-68-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
Data has not been verified.

Test 2 of 2

DIME Test ID: 2024-10-22-68-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 01/16/2025
Date Tested: 11/04/2024
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 2000.1 g
Mass of the specimen and specimen basket assembly prior to ignition 4291.3 g
Mass of HMA Sample prior to ignition 2291.2 g
Corrected Asphalt Binder Content 4.98 %
Mass Loss 129.6 g
Mass of aggregate remaining after ignition 2161.6 g
Correction Factor (Percent by mass of HMA Specimen) 0.68 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 C