Project Information

Project ID: 1000253 DEA: 070W4504 EFIS: 0722000060 QA Service Level: 1

DIST-CO-RTE-PM: 07-LA-138-50.0/63.7

Work Description: PLACE HMA (TYPE A) AND COLD PLANE ASPHALT CONCRETE PAVEMENT.

Location Description: LOS ANGELES COUNTY IN AND NEAR PALMDALE FROM 0.1 MILE SOUTH OF AVENUE S TO 0.1 MILE EAST OF 165TH STREET EAST

Contractor Name: CALMEX ENGINEERING, INC.

Contractor Address: Unknown

Resident Engineer: Ramy Beshara Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-10-05-14

TL Number from the TL Form: 019705

Sample Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953

Sample Organization Contact: (213) 817-0387

Type of Sample: Acceptance

Type of Material: Hot Mix Asphalt

Sample Taken Date: 10/05/2024

Date that the sample was received by the laboratory/organization performing the testing: 10/10/2024

The quantity of what the sample constitutes: 750 Tons

A brief description of the sample: 3/8" WMA-A 420911 PAL VLO

From where was the sample collected: Manufacturer

Laboratory sample identification: 24-316

Structure unique identifier:

Structure name:

The fabricator/manufacturer/facility name: Vulcan Materials Palmdale

Material Information

HMA Type: Type A HMA

HMA Grading: 3/8 inch

Lot number:

Sublot number:

HMA Mix Number: 420911 PAL VLO

Binder content (%):

Virgin binder PG:

Design binder PG:

Binder Supplier:

RAP content (%):

WMA Additives:

Antistrip type:

Test Results

Test 1 of 2

DIME Test ID: 2024-10-05-14-1

Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)

Verified Date: 10/23/2024

Date Tested: 10/23/2024

Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953

Organization Address: 1940 South Workman Mill Road,

Organization City: Whittier

Organization State: CA

Organization Zipcode: 90601

Organization Email: chad.chotibhongs@dot.ca.gov

Organization Phone: (213) 407-6963

General Comments for this Test:

Test Result Compliance: not applicable

Additional Comments When Verified:

Number of Samples	1
What is the unit of measurement for theoretical density?	US Units
Mass Determination	Air
Method Performed	no data
Mass of container filled with water 1	7359.3 grams
Mass of oven-dry sample in air for Sample 1	1518.3 grams
Mass of container filled with the sample and water for Sample 1	8258 grams
Temperature of Water	77 °F
Specific Gravity for Sample 1	2.45
Theoretical maximum density at 25°C (77°F)	152.5 lb/ft^3

Test 2 of 2

DIME Test ID: 2024-10-05-14-2

Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)