Project Information

Project ID: 993776 DEA: 040J3004 EFIS: 0413000433 QA Service Level: 1

DIST-CO-RTE-PM: 04-SON-1-26.7/27.1

Work Description: CONSTRUCTING RETAINING WALL AND CONFINEMENT SYSTEM TO RESTORE SLIPOUT.

Location Description: SONOMA COUNTY NEAR JENNER FROM 0.3 MILE TO 0.7 MILE NORTH OF MEYERS GRADE ROAD

Contractor Name: ARGONAUT CONSTRUCTION

Contractor Address: P. O. BOX 639, SANTA ROSA, CA 95402

Resident Engineer: Fabio La Serna Structure Rep.: Matteo D-Orio

Sample Information

DIME Sample ID: 2024-08-26-108

TL Number from the TL Form:

Sample Submitted By Organization: CT D04 - Petaluma Field Laboratory

Sample Organization Contact: (510) 385-6841

Type of Sample: Quality Assurance

Type of Material: Aggregate

Sample Taken Date: 08/26/2024

Date that the sample was received by the laboratory/organization performing the testing: 08/27/2024

The quantity of what the sample constitutes: 4 bags per bin

A brief description of the sample: 1/2 RHMA-G

From where was the sample collected: Manufacturer

Laboratory sample identification: PET-24-368

Structure unique identifier:

Structure name:

The fabricator/manufacturer/facility name: BODEAN

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-49-0032

The fabricator's/manufacturer's product name for the sample:

The fabricator/manufacturer designation for the sample:

The plant number:

A detailed description of where the material sample was collected: Hot Bins

Where the material sample would have been placed if not sampled:

Primary Aggregate Nominal Size: 1/2 inch

The concrete mix design number:

Lot number: 1

Sublot number: 1

Aggregate Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2024-08-26-108-1

Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)

Verified Date: 10/18/2024

Date Tested: 08/27/2024

Submitted By Organization: CT D04 - Petaluma Field Laboratory

Organization Address: 5675 Gibraltar Drive,

Organization City: Pleasanton

Organization State: CA

Organization Zipcode: 94588

Organization Email: glenn.cea@dot.ca.gov

Organization Phone: (510) 385-6841

General Comments for this Test:

Test Result Compliance: complies

Additional Comments When Verified:

What type of gradation is being tested?	HMA Gradation
Cumulative percent passing the 2 in. sieve	no data
Cumulative percent passing the 1 1/2 in. sieve	100 %
Cumulative percent passing the 1 in. sieve	100 %
Cumulative percent passing the 3/4 in. sieve	100 %
Cumulative percent passing the 1/2 in. sieve	100 %
Cumulative percent passing the 3/8 in. sieve	92 %
Cumulative percent passing the #4 sieve	41 %
Cumulative percent passing the #8 sieve	16 %
Cumulative percent passing the #16 sieve	10 %
Cumulative percent passing the #30 sieve	8 %
Cumulative percent passing the #50 sieve	6 %
Cumulative percent passing the #100 sieve	4 %
Cumulative percent passing the #200 sieve	2.5 %

Test 2 of 2

DIME Test ID: 2024-08-26-108-2

Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)