Print Report | Back to Sample Detail

Sample Record for 2024-06-26-160

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993333 DEA: 04264724 EFIS: 0419000068 QA Service Level: 1
DIST-CO-RTE-PM: 04-MRN-101-R20.8/27.1
Work Description: CIP BRIDGES, CONSTRUCT ROADWAY, RETAINING WALLS AND MODIFY ELECTRICAL.
Location Description: MARIN COUNTY IN AND NEAR NOVATO FROM 0.1 MILE SOUTH OF FRANKLIN AVENUE OVERHEAD TO 0.5 MILE SOUTH OF SAN ANTONIO CREEK BRIDGE
Contractor Name: GHILOTTI CONSTRUCTION CO. INC. (RILEY GENAZZI & JOSH SERAFINO)
Contractor Address: 246 GHILOTTI AVE., SANTA ROSA, CA 95407
Resident Engineer: Fabio La Serna Structure Rep.: Jeremy Light

Sample Information

DIME Sample ID: 2024-06-26-160
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Petaluma Field Laboratory
Sample Organization Contact: (510) 385-6841
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/26/2024
Date that the sample was received by the laboratory/organization performing the testing: 06/27/2024
The quantity of what the sample constitutes: 4 BOXES
A brief description of the sample: 3/4 HMA-SP Type A
From where was the sample collected: Manufacturer
Laboratory sample identification: PET-24-274
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: DUTRA

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 11
Sublot number: 5
HMA Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2024-06-26-160-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 10/17/2024
Date Tested: 06/27/2024
Submitted By Organization: CT D04 - Petaluma Field Laboratory
Organization Address: 5675 Gibraltar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: glenn.cea@dot.ca.gov
Organization Phone: (510) 385-6841
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 3284.5 g
Mass of the specimen and specimen basket assembly prior to ignition 5339.5 g
Mass of HMA Sample prior to ignition 2055 g
Corrected Asphalt Binder Content 5.81 %
Mass Loss 136.2 g
Mass of aggregate remaining after ignition 1918.8 g
Correction Factor (Percent by mass of HMA Specimen) 0.72 %
Moisture Content no data0 %
Temperature Compensation Factor 0.1 %
Test Temperature 482 C