Print Report | Back to Sample Detail

Sample Record for 2024-09-19-81

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-09-19-81
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/19/2024
Date that the sample was received by the laboratory/organization performing the testing: 09/19/2024
The quantity of what the sample constitutes: 24 BOXES OF RHMA
A brief description of the sample: 1/2" RHMA-G
From where was the sample collected: Supplier
Laboratory sample identification: 024-064
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Bradshaw Plant

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2024-09-19-81-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 10/16/2024
Date Tested: 10/16/2024
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 2
What is the unit of measurement for theoretical density? SI Units
Mass Determination Water
Method Performed no data
Mass of oven-dry sample in air for Sample 1 1,579.0 grams
Mass of container submerged in water for Sample 1 1344.2 grams
Mass of the sample and container in water for Sample 1 2285.3 grams
Mass of oven-dry sample in air for Sample 2 1,609.4 grams
Mass of container submerged in water for Sample 2 1344.2 grams
Mass of the sample and container in water for Sample 2 2300.5 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.475
Specific Gravity for Sample 2 2.464
Average Specific Gravity 2.470
Theoretical maximum density at 25°C (77°F) 2463 kg/m^3

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2024-09-19-81-2AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)10/16/2024Not scheduledGlenn BradleyCT HQ - Sacramento Hot Mix Asphalt Laboratory
2024-09-19-81-3AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)10/16/2024Not scheduledGlenn BradleyCT HQ - Sacramento Hot Mix Asphalt Laboratory
2024-09-19-81-4AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)10/16/2024Not scheduledGlenn BradleyCT HQ - Sacramento Hot Mix Asphalt Laboratory
2024-09-19-81-5CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt10/16/2024Not scheduledGlenn BradleyCT HQ - Sacramento Hot Mix Asphalt Laboratory
2024-09-19-81-6AASHTO T329-13: Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method (Moisture Content)10/16/2024Not scheduledGlenn BradleyCT HQ - Sacramento Hot Mix Asphalt Laboratory
2024-09-19-81-7AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)10/16/2024Not scheduledGlenn BradleyCT HQ - Sacramento Hot Mix Asphalt Laboratory