Print Report | Back to Sample Detail

Sample Record for 2024-10-02-96

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1594 DEA: 040A1304 QA Service Level: 1
DIST-CO-RTE-PM: 04-SCL-85,237-R35.4/R38.0,R0.0
Work Description: PLANTING AND IRRIGATION
Location Description: IN SANTA CLARA COUNTY INMOUNTAIN VIEW AT VARIOUS LOCATIONS
Contractor Name: WATKINS AND BORTOLUSSI,INC.
Contractor Address: 77 LARKSPUR STREET, SAN RAFAEL, CA 94901-4886
Resident Engineer: BRIAN MACKLE Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-10-02-96
TL Number from the TL Form:
Sample Submitted By Organization: Surecast West
Sample Organization Contact: (951) 491-9506
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 10/02/2024
Date that the sample was received by the laboratory/organization performing the testing: 10/14/2024
The quantity of what the sample constitutes: 5.75 CY
A brief description of the sample: TYPE II/V
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CEMEX-REDLANDS

Material Information

The concrete mix design number: 1610974
The truck number from where the sample was collected:
The batch plant ticket number from where the sample was collected: 31365125
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: CONCRETE SAMPLE FROM WHEELBARROW
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2024-10-02-96-1
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Verified Date: 10/15/2024
Date Tested: 10/14/2024
Submitted By Organization: Surecast West
Organization Address: 8203 Alabama Street,
Organization City: Redlands
Organization State: CA
Organization Zipcode: 92373
Organization Email: cody@surecastwest.com
Organization Phone: (951) 491-9506
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 3
Test performed With no density determined
Capped in accordance with? ASTM C617 - Sulfur Mortar Cap
Average diameter of cylinder 1 4.00 in
Average diameter of cylinder 2 4.00 in
Average diameter of cylinder 3 4.00 in
Cross sectional area of cylinder 1 12.57 in^2
Cross sectional area of cylinder 2 125.57 in^2
Cross sectional area of cylinder 3 12.57 in^2
Compressive strength (to nearest 10 psi) 5260 psi
Maximum load on cylinder 1 66680 lb
Maximum load on cylinder 2 66960 lb
Maximum load on cylinder 3 64460 lb
Type of fracture pattern of cylinder 1 1
Type of fracture pattern of cylinder 2 1
Type of fracture pattern of cylinder 3 1
Comment on any defect in either specimen or caps (Max 250 Characters) no data
Correction factor for cylinder 1 1
Correction factor for cylinder 2 1
Correction factor for cylinder 3 1
Age of specimen 12 days
Age of specimen in hours no data0 hours