Sample Record for 2024-10-10-19
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 215348 DEA: 060U4204 EFIS: 0616000004
QA Service Level: 1
DIST-CO-RTE-PM: 06-FRE-99-R4.9/11.6
Work Description: CONSTRUCT CRCP, PLACE HMA, AND ROADWAY EXCAVATION.
Location Description: FRESNO COUNTY IN AND NEAR SELMA AND FOWLER FROM MCCALL AVENUE UNDERCROSSING TO 0.5 MILE NORTH OF MERCED STREET UNDERCROSSING
Contractor Name: SECURITY PAVING COMPANY, INC.
Contractor Address: 3075 Townsgate Rd. Suite 200, Westlake Village CA 91361
Resident Engineer: Chris Wilfong Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2024-10-10-19
TL Number from the TL Form:
Sample Submitted By Organization: CT SC - 3675 - Monterey, Santa Cruz, San Benito
Sample Organization Contact: (805) 471-2109
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 10/10/2024
Date that the sample was received by the laboratory/organization performing the testing: 10/11/2024
The quantity of what the sample constitutes: 5
A brief description of the sample: 4X8 Concrete Cylinders
From where was the sample collected: Job Site
Laboratory sample identification: Mix NCT09064
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Security Paving Company
Material Information
The concrete mix design number: NCT09064
The truck number from where the sample was collected: Load 2
The batch plant ticket number from where the sample was collected: 1364893
Concrete batch plant: 111
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: RTE 99, Median CIDH, STA 257+50
Where the material sample would have been placed if not sampled: Unknown
From Lot No.:
Bag Lot No.:
Test Results
Test 1 of 1
DIME Test ID: 2024-10-10-19-1
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Verified Date: 10/16/2024
Date Tested: 10/16/2024
Submitted By Organization: CT D06 - Millbrook Field Laboratory
Organization Address: 1352 W. Olive Ave,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93728
Organization Email: tomas.silva@dot.ca.gov
Organization Phone: (559) 417-5341
General Comments for this Test: required strength 4000 @28 day
Test Result Compliance: does not comply
Additional Comments When Verified:
|
Unit system used?
|
US Units
|
|
Number of specimens
|
3
|
|
Test performed
|
With no density determined
|
|
Capped in accordance with?
|
ASTM C617 - Sulfur Mortar Cap
|
|
Average diameter of cylinder 1
|
4.00 in
|
|
Average diameter of cylinder 2
|
4.00 in
|
|
Average diameter of cylinder 3
|
4.00 in
|
|
Cross sectional area of cylinder 1
|
12.57 in^2
|
|
Cross sectional area of cylinder 2
|
12.57 in^2
|
|
Cross sectional area of cylinder 3
|
12.57 in^2
|
|
Compressive strength (to nearest 10 psi)
|
3960 psi
|
|
Maximum load on cylinder 1
|
50570 lb
|
|
Maximum load on cylinder 2
|
50710 lb
|
|
Maximum load on cylinder 3
|
48230 lb
|
|
Compressive strength of cylinder 1
|
4023.1 psi
|
|
Type of fracture pattern of cylinder 1
|
2
|
|
Compressive strength of cylinder 2
|
4034.2 psi
|
|
Compressive strength of cylinder 3
|
3836.9 psi
|
|
Type of fracture pattern of cylinder 2
|
2
|
|
Type of fracture pattern of cylinder 3
|
2
|
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
|
Correction factor for cylinder 1
|
1
|
|
Correction factor for cylinder 2
|
1
|
|
Correction factor for cylinder 3
|
1
|
|
Age of specimen
|
6 days
|
|
Age of specimen in hours
|
no data0 hours
|
