Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000253 DEA: 070W4504 EFIS: 0722000060
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-138-50.0/63.7
Work Description: PLACE HMA (TYPE A) AND COLD PLANE ASPHALT CONCRETE PAVEMENT.
Location Description: LOS ANGELES COUNTY IN AND NEAR PALMDALE FROM 0.1 MILE SOUTH OF AVENUE S TO 0.1 MILE EAST OF 165TH STREET EAST
Contractor Name: CALMEX ENGINEERING, INC.
Contractor Address: Unknown
Resident Engineer: Ramy Beshara Structure Rep.: Unknown
DIME Sample ID: 2024-10-05-3
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Production Start-Up
Type of Material: Hot Mix Asphalt
Sample Taken Date: 10/05/2024
Date that the sample was received by the laboratory/organization performing the testing: 10/09/2024
The quantity of what the sample constitutes: 20 BX WMA 3 QT PG 64-16 1 QT EVO 4 BGS WMF 4 BGS 3/8 2 BGS RAP
A brief description of the sample: 3/8" WMA SP R20 .25% EVO
From where was the sample collected: Manufacturer
Laboratory sample identification: 0526A-24
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan - PALMDALE
DIME Test ID: 2024-10-05-3-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 12/19/2024
Date Tested: 10/11/2024
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
SI Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of container filled with water
|
7350.6 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
1582.3 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8291.1 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.465
|
|
Theoretical maximum density at 25°C (77°F)
|
2457.9 kg/m^3
|
DIME Test ID: 2024-10-05-3-2
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 12/19/2024
Date Tested: 10/12/2024
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
|
Percent Air Voids
|
1.6 %
|
|
Percent Air Voids 2
|
1.3 %
|
|
Percent Air Voids 3
|
1.5 %
|
|
Average Percent Air Voids
|
1.5 %
|
DIME Test ID: 2024-10-05-3-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 12/19/2024
Date Tested: 10/12/2024
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.425
|
|
Bulk Specific Gravity 2
|
2.434
|
|
Bulk Specific Gravity 3
|
2.427
|
|
Average Bulk Specific Gravity
|
2.429
|
DIME Test ID: 2024-10-05-3-4
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 12/19/2024
Date Tested: 10/11/2024
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
1382 g
|
|
Corrected Asphalt Binder Content
|
6.3 %
|
|
Mass Loss
|
94.4 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.31 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.22 %
|
|
Test Temperature
|
538 C
|
DIME Test ID: 2024-10-05-3-5
Test Method: AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)
Verified Date: 12/19/2024
Date Tested: 10/18/2024
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
|
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel A)
|
20000
|
|
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel B)
|
20000
|
|
Impression at specified number of passes, or specified maximum impression if applicable (Wheel A)
|
0.51 mm
|
|
Impression at specified number of passes, or specified maximum impression if applicable (Wheel B)
|
0.79 mm
|
|
Stripping Inflection Point (Wheel A)
|
11700
|
|
Stripping Inflection Point (Wheel B)
|
9941
|
