Print Report | Back to Sample Detail

Sample Record for 2024-09-02-5

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 55555 DEA: AMRL EFIS: AMRL QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for AASHTO Materials Reference Laboratory (AMRL).
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-09-02-5
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Proficiency
Type of Material: Asphaltic Emulsion
Sample Taken Date: 09/02/2024
Date that the sample was received by the laboratory/organization performing the testing: 09/02/2024
The quantity of what the sample constitutes: PSP sample emulsified
A brief description of the sample: Sample 82 (B)
From where was the sample collected: Other
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AASHTO resource

Material Information

Emulsion Grade: SS-1h
Lot Number:
Sub Lot:
Dilution Percentage Rate:
Test results on following page(s): 5

Test Results

Test 1 of 5

DIME Test ID: 2024-09-02-5-1
Test Method: AASHTO T59-22: Standard Method of Test for Emulsified Asphalts (Residue and Oil Distillate (Sec. 6))
Verified Date: 10/10/2024
Date Tested: 10/10/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: Distillation - Sample B
Test Result Compliance:
Additional Comments When Verified:
What parameters are being calculated? Both
Is this a polymer-modified emulsion No
Percentage of oil residue 59 %
Percentage of oil distillate (by volume of emulsified asphalt) 0.3 %

Test 2 of 5

DIME Test ID: 2024-09-02-5-2
Test Method: AASHTO T59-22: Standard Method of Test for Emulsified Asphalts (Emulsified Asphalt Residue Evap. (Sec. 7))
Verified Date: 10/10/2024
Date Tested: 10/10/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: Evap - Sample B
Test Result Compliance:
Additional Comments When Verified:
How many beakers will be used to conduct the test? 4
Beaker 1 Residue 59.4 %
Beaker 2 Residue 59.2 %
Beaker 3 Residue 59 %
Beaker 4 Residue 59.2 %
Percentage of residue 59 %

Test 3 of 5

DIME Test ID: 2024-09-02-5-3
Test Method: AASHTO T49-15: Standard Method of Test for Penetration of Bituminous Materials
Verified Date: 10/10/2024
Date Tested: 10/10/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: Pen. of Distillation Residue - Sample B
Test Result Compliance:
Additional Comments When Verified:
Was test performed on residue from distillation or evaporation? Distillation
Temperature (C) 25 C
Load (grams) 50 grams
Time (sec) 5 second
Average Penetration 76 dmm

Test 4 of 5

DIME Test ID: 2024-09-02-5-4
Test Method: AASHTO T49-15: Standard Method of Test for Penetration of Bituminous Materials
Verified Date: 10/10/2024
Date Tested: 10/10/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: Pen. of Evap residue - Sample B
Test Result Compliance:
Additional Comments When Verified:
Was test performed on residue from distillation or evaporation? Evaporation
Temperature (C) 25 C
Load (grams) 50 grams
Time (sec) 5 second
Average Penetration 59 dmm

Test 5 of 5

DIME Test ID: 2024-09-02-5-5
Test Method: AASHTO T59-22: Standard Method of Test for Emulsified Asphalts (Viscosity (Saybolt Furol) (Sec. 9))
Verified Date: 10/10/2024
Date Tested: 10/10/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: Saybolt - Sample B
Test Result Compliance:
Additional Comments When Verified:
Efflux time (ET) for test sample 19 sec
Corrected efflux time as the Saybolt Furol viscosity (Corrected V) no data0 sec
Test efflux temperature no data0 F