Print Report | Back to Sample Detail

Sample Record for 2024-09-24-92

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 995445 DEA: 043W5204 EFIS: 0421000384 QA Service Level: 1
DIST-CO-RTE-PM: 04-ALA-580,680,880-VAR
Work Description: PLACE POLYESTER CONCRETE OVERLAY AND REPLACE JOINT SEAL.
Location Description: ALAMEDA COUNTY AT VARIOUS LOCATIONS
Contractor Name: MYERS & SONS CONSTRUCTION, LLC
Contractor Address: 45 Morrison Avenue, Sacramento, CA 95838
Resident Engineer: Eddie Dike Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-09-24-92
TL Number from the TL Form: C092424
Sample Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Sample Organization Contact: (510) 224-6127
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/24/2024
Date that the sample was received by the laboratory/organization performing the testing: 09/26/2024
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 1/2" HMA w/25% RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Pleasanton

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number: 1
Sublot number: 1
HMA Mix Number: MD 6741 WM
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2024-09-24-92-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 10/03/2024
Date Tested: 10/01/2024
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 B Gibratar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
General Comments for this Test: Burn #1
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 2896.4 g
Mass of the specimen and specimen basket assembly prior to ignition 4451.1 g
Mass of HMA Sample prior to ignition 1554.7 g
Corrected Asphalt Binder Content 5.09 %
Mass Loss 99.7 g
Mass of aggregate remaining after ignition 1455 g
Correction Factor (Percent by mass of HMA Specimen) 1.13 %
Moisture Content no data0 %
Temperature Compensation Factor 0.19 %
Test Temperature 482 C