Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994869 DEA: 073237U4 EFIS: 0720000224
QA Service Level: 1
DIST-CO-RTE-PM: 07-VEN-150-13.3/19
Work Description: PLACE HMA (TYPE A) AND COLD PLANE ASPHALT
Location Description: VENTURA COUNTY IN AND NEAR OJAI FROM BURNHAM ROAD TO GORHAM ROAD
Contractor Name: C. A. RASMUSSEN INC.
Contractor Address: 28548 Livingston Ave., Valencia, CA, 91355
Resident Engineer: Denrick Bautista Structure Rep.: Unknown
DIME Sample ID: 2024-03-05-67
TL Number from the TL Form: 1765
Sample Submitted By Organization: UC Pavement Research Center - Davis
Sample Organization Contact: (530) 304-8941
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 03/05/2024
Date that the sample was received by the laboratory/organization performing the testing: 03/05/2024
The quantity of what the sample constitutes: 48 buckets
A brief description of the sample: 3/4" HMA Type-A Virgin nSSP
From where was the sample collected: Supplier
Laboratory sample identification: 492MixFJMF2
Structure unique identifier:
Structure name: JMF Hot Drop
The fabricator/manufacturer/facility name: Vulcan Saticoy
DIME Test ID: 2024-03-05-67-1
Test Method: ASTM D8225-19: Standard Test Method For Determination Of Cracking Tolerance Index Of Asphalt Mixture Using The Indirect Tensile Cracking Test At Intermediate Temperature
Verified Date: 10/02/2024
Date Tested: 10/02/2024
Submitted By Organization: UC Pavement Research Center - Davis
Organization Address: 2001 Ghausi Hall,
Organization City: Davis
Organization State: CA
Organization Zipcode: 95616
Organization Email: jbuscheck@ucdavis.edu
Organization Phone: (530) 304-8941
General Comments for this Test: Verifies
Test Result Compliance:
Additional Comments When Verified:
|
Number of specimens
|
5
|
|
Specimen Preparation method
|
PMLC
|
|
Specimen Number
|
no data
|
|
Specimen Number
|
no data
|
|
Specimen Number
|
no data
|
|
Specimen Number
|
no data
|
|
Specimen Number
|
no data
|
|
Reheat protocol used
|
no data
|
|
Mid term aging protocol
|
no data
|
|
Test temperature
|
25 C
|
|
Condition method
|
Condition Chamber
|
|
Specimen air voids
|
7 %
|
|
Specimen thickness
|
61.9 mm
|
|
Specimen diameter
|
149.7 mm
|
|
Displacement
|
4.2 mm
|
|
Peak load
|
15.9 kN
|
|
Absolute value of the post-peak slope
|
7 N/m
|
|
Failure energy
|
7061 Joules/m^2
|
|
Work of failure
|
65.4 Joules
|
|
Cracking tolerance index
|
27
|
|
Specimen air voids 2
|
7 %
|
|
Specimen thickness 2
|
62.1 mm
|
|
Specimen diameter 2
|
149.7 mm
|
|
Displacement 2
|
3.8 mm
|
|
Peak load 2
|
17.3 kN
|
|
Absolute value of the post-peak slope 2
|
7200000 N/m
|
|
Failure energy 2
|
6591 Joules/m^2
|
|
Work of failure 2
|
61.2 Joules
|
|
Cracking tolerance index 2
|
22
|
|
Specimen air voids 3
|
7 %
|
|
Specimen thickness 3
|
61.9 mm
|
|
Specimen diameter 3
|
149.4 mm
|
|
Displacement 3
|
3.5 mm
|
|
Peak load 3
|
19.6 kN
|
|
Absolute value of the post-peak slope 3
|
10400000 N/m
|
|
Failure energy 3
|
7035 Joules/m^2
|
|
Work of failure 3
|
65.1 Joules
|
|
Cracking tolerance index 3
|
16
|
|
Specimen air voids 4
|
7 %
|
|
Specimen thickness 4
|
62 mm
|
|
Specimen diameter 4
|
149.5 mm
|
|
Displacement 4
|
3.5 mm
|
|
Peak load 4
|
19.3 kN
|
|
Absolute value of the post-peak slope 4
|
10700000 N/m
|
|
Failure energy 4
|
6840 Joules/m^2
|
|
Work of failure 4
|
63.4 Joules
|
|
Cracking tolerance index 4
|
15
|
|
Specimen air voids 5
|
7 %
|
|
Specimen thickness 5
|
62 mm
|
|
Specimen diameter 5
|
149.8 mm
|
|
Displacement 5
|
3.8 mm
|
|
Peak load 5
|
19.1 kN
|
|
Absolute value of the post-peak slope 5
|
11300000 N/m
|
|
Failure energy 5
|
6470 Joules/m^2
|
|
Work of failure 5
|
60.1 Joules
|
|
Cracking tolerance index 5
|
14
|
