Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994226 DEA: 042K7004 EFIS: 0417000010 COOP: 042895
QA Service Level: 1
DIST-CO-RTE-PM: 04-ALA-880-R0.0/11.8
Work Description: Cold plane pavement and overlay with RHMA-G/RHMA-O (CAPITAL PREVENTIVE MAINTENANCE)
Location Description: ALAMEDA COUNTY IN FREMONT AND NEWARK FROM SANTA CLARA COUNTY LINE TO 0.4 MILE NORTH OF FREMONT BOULEVARD OVERCROSSING
Contractor Name: BAY CITIES PAVING & GRADING, INC.
Contractor Address: 1450 Civic Ct. BLDG B #400, Concord CA, 94520
Resident Engineer: Rodelio Baluyot Structure Rep.: Bettie C. "Betty" Geng
DIME Sample ID: 2024-09-09-93
TL Number from the TL Form: C690435
Sample Submitted By Organization: CT D04 - Hayward Field Laboratory
Sample Organization Contact: (510) 723-0168
Type of Sample: Production Start-Up
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/09/2024
Date that the sample was received by the laboratory/organization performing the testing: 09/10/2024
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 3/4 RHMA-G
From where was the sample collected: Supplier
Laboratory sample identification: HW-090924-MDSE
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Materials-Pleasanton
DIME Test ID: 2024-09-09-93-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 10/01/2024
Date Tested: 09/12/2024
Submitted By Organization: CT D04 - Hayward Field Laboratory
Organization Address: 21339 Cabot Boulevard,
Organization City: Hayward
Organization State: CA
Organization Zipcode: 94545
Organization Email: pamela.brown@dot.ca.gov
Organization Phone: (510) 385-8258
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Number of Samples
|
2
|
|
What is the unit of measurement for theoretical density?
|
SI Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of container filled with water 1
|
7334.8 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
2509 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8798.4 grams
|
|
Mass of container filled with water 2
|
7334.8 grams
|
|
Mass of oven-dry sample in air for Sample 2
|
2529.1 grams
|
|
Mass of container filled with the sample and water for Sample 2
|
8813.9 grams
|
|
Temperature of Water
|
76.6 °F
|
|
Specific Gravity for Sample 1
|
2.4
|
|
Specific Gravity for Sample 2
|
2.409
|
|
Average Specific Gravity
|
2.404
|
|
Theoretical maximum density at 25°C (77°F)
|
2397 kg/m^3
|