Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000409 DEA: 051S1604 EFIS: 0524000176
QA Service Level: 1
DIST-CO-RTE-PM: 05-MON-1-60
Work Description: Rocky Creek Slip Out Permanent Restoration Project
Location Description:
Contractor Name: Gordon N Ball, Inc. (Fred Velasco/Stuart Yamamoto)
Contractor Address: 333 Camille Avenue, Alamo, CA 94507
Resident Engineer: Jorge Uberhuaga Structure Rep.: Daniel Dait
DIME Sample ID: 2024-09-26-44
TL Number from the TL Form:
Sample Submitted By Organization: Con-Fab California Corporation - Lathrop
Sample Organization Contact: (209) 249-4700
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 09/26/2024
Date that the sample was received by the laboratory/organization performing the testing: 09/26/2024
The quantity of what the sample constitutes: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
A brief description of the sample: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: ConFab Lathrop
Source Identification (SMARA, name of Pit or Job Site): Con-Fab California, LLC
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Storage Bin
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: VER-95LV
Lot number:
Sublot number:
Aggregate Mix Number:
DIME Test ID: 2024-09-26-44-1
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 09/30/2024
Date Tested: 09/26/2024
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand: 2.5%
1/2": 0.39%
3/8": 0.39%
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
2.5 %
|
DIME Test ID: 2024-09-26-44-2
Test Method: ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Verified Date: 09/30/2024
Date Tested: 09/26/2024
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
What type of gradation is being tested?
|
Combined Gradation
|
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
96.3 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
76.5 %
|
|
Cumulative percent passing the #4 sieve
|
49 %
|
|
Cumulative percent passing the #8 sieve
|
38.9 %
|
|
Cumulative percent passing the #16 sieve
|
26.5 %
|
|
Cumulative percent passing the #30 sieve
|
17.5 %
|
|
Cumulative percent passing the #50 sieve
|
10.6 %
|
|
Cumulative percent passing the #100 sieve
|
4.1 %
|
|
Cumulative percent passing the #200 sieve
|
1 %
|
DIME Test ID: 2024-09-26-44-3
Test Method: ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 09/30/2024
Date Tested: 09/24/2024
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand: 1.4%
1/2": 1.03%
3/8": 1.14%
Test Result Compliance:
Additional Comments When Verified:
|
Percent finer than No. 200 sieve
|
1.4 %
|
DIME Test ID: 2024-09-26-44-4
Test Method: ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
Verified Date: 09/30/2024
Date Tested: 09/24/2024
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
