Print Report | Back to Sample Detail

Sample Record for 2024-09-25-42

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994771 DEA: 07320804 EFIS: 0716000042 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-164-4.0/6.9
Work Description: CONSTRUCT MINOR CONCRETE AND MODIFYING SIGNAL & LIGHTING SYSTEMS.
Location Description: LOS ANGELES COUNTY IN SOUTH EL MONTE, EL MONTE AND ROSEMEAD AT VARIOUS LOCATIONS ON ROUTE 164 FROM RUSH STREET TO RUDELL UNDERPASS
Contractor Name: CALPROMAX ENGINEERING, INC.
Contractor Address: 650 N Rose Drive #186, Placentia, CA 92870
Resident Engineer: Shoaib Bin Azam Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-09-25-42
TL Number from the TL Form:
Sample Submitted By Organization: Alta Vista Solutions - Whittier
Sample Organization Contact: (510) 542-9827
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 09/25/2024
Date that the sample was received by the laboratory/organization performing the testing: 09/25/2024
The quantity of what the sample constitutes: 1 bag
A brief description of the sample: Aggregate Base
From where was the sample collected: Source
Laboratory sample identification: 24-2980
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: N/A

Material Information

Source Identification (SMARA, name of Pit or Job Site): N/A
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: CTM 231 Test Holes
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2024-09-25-42-1
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Verified Date: 09/26/2024
Date Tested: 09/25/2024
Submitted By Organization: Alta Vista Solutions - Whittier
Organization Address: 12409 Slauson Avenue, Suite I,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90606
Organization Email: nicholas.hoffmann@oneatlas.com
Organization Phone: (510) 542-9827
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Standard Count Density 9670 g/cc
Count or Density 1 28842 g/cc
Count or Density 2 26884 g/cc
Count or Density 3 29332 g/cc
Standard Count Moisture 15854 g/cc
Moisture Count 1 1925 g/cc
Moisture Count 2 2044 g/cc
Moisture Count 3 2182 g/cc
Sum of Count or Density 85058 g/cc
Average of Count or Density 28352.67 g/cc
Sum of Moisture Count 6151 g/cc
Average of Moisture Count 2050.33 g/cc
Calculated Percent Relative Compaction 91.9 %
Reported Percent Relative Compaction 92 %

Test 2 of 2

DIME Test ID: 2024-09-25-42-2
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 09/26/2024
Date Tested: 09/25/2024
Submitted By Organization: Alta Vista Solutions - Whittier
Organization Address: 12409 Slauson Avenue, Suite I,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90606
Organization Email: nicholas.hoffmann@oneatlas.com
Organization Phone: (510) 542-9827
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Is oversize material No
In-place wet density 1.82
Highest adjust wet density 1.98
Relative compaction 92
% Moisture no data
Optimum Moisture no data