Sample Record for 2024-09-18-4
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 210485 DEA: 080R8504 EFIS: 0812000200
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD--
Work Description: CONSTRUCT SAND STORAGE BUILDING AND PAVE YARD
Location Description: SAN BERNARDINO COUNTY AT NIPTON 94200 CLARKE MOUNTAIN ROAD ON ROUTE 15 ABOUT 33 MILES EAST OF BAKER AT THE MOUNTAIN PASS MAINTENANCE STATION MOUNTAIN PASS, CALIFORNIA 92366
Contractor Name: RE CHAFFEE CONSTRUCTION INC.
Contractor Address: 18020 National Trails Hwy, Oro Grande, CA 92368
Resident Engineer: Khoa Nguyen Structure Rep.: Monty Navarro
Sample Information
DIME Sample ID: 2024-09-18-4
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Los Angeles Field Office
Sample Organization Contact: (858) 285-5797
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 09/18/2024
Date that the sample was received by the laboratory/organization performing the testing: 09/24/2024
The quantity of what the sample constitutes: 45 assemblies
A brief description of the sample: 3/4" x 2" A325 Fastener Assembly
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Cordova Bolt Inc.
Material Information
Rocap Number(s):
Heat Number(s): Bolt-10860050
Nut-8000025948
Washer- 247688
Nut Mfg. Lot Number(s): W000115383
Washer Mfg. Lot Number(s): 0224-129
Bolt Specification: ASTM A325
Bolt Length(s): 2"
Nut Specification: ASTM A563
Washer Specification: ASTM F436
Finish: HDG ASTM F2329/A153
Diameter/Size: 3/4"
Bolt Mfg. Lot Number: E755N1
Rocap Test Requirement(s):
Lubricant Requirements(s):
Washer Inner Diameter(s):
Test Results
Test 1 of 8
DIME Test ID: 2024-09-18-4-1
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 10/01/2024
Date Tested: 10/01/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Proof Load
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | | 1A | | | 51178 | | Proof Load | |
| |
|
UTM
|
450kip
|
|
Temperature
|
72 f
|
Test 2 of 8
DIME Test ID: 2024-09-18-4-2
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/01/2024
Date Tested: 10/01/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
E755N1
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
A325 LE USA
|
|
Size
|
0.75 in
|
|
Bolt Length
|
2 in
|
|
Gage Type
|
Pass
|
Test 3 of 8
DIME Test ID: 2024-09-18-4-3
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 10/01/2024
Date Tested: 10/01/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
W000115383
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
DH U
|
|
Size
|
0.75 in
|
|
Gage Type
|
Pass
|
Test 4 of 8
DIME Test ID: 2024-09-18-4-4
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/01/2024
Date Tested: 10/01/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
E755N1
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
A325 LE USA
|
|
Size
|
0.75 in
|
|
Bolt Length
|
2 in
|
|
Measurement Average
|
3.63 mils
|
Test 5 of 8
DIME Test ID: 2024-09-18-4-5
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/01/2024
Date Tested: 10/01/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
W000115383
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
DH U
|
|
Size
|
0.75 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.12 mils
|
Test 6 of 8
DIME Test ID: 2024-09-18-4-6
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/01/2024
Date Tested: 10/01/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
0224-129
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
F436 TSI
|
|
Size
|
0.75 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.45 mils
|
Test 7 of 8
DIME Test ID: 2024-09-18-4-7
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 10/01/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
0224-129
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
F436 TSI
|
|
Size
|
0.75 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
37.3
|
|
Spacing
|
Ok
|
Test 8 of 8
DIME Test ID: 2024-09-18-4-8
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 10/01/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
E755N1
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
A325 LE USA
|
|
Size
|
0.75 in
|
|
Bolt Length
|
2 in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
27.9
|
|
Spacing
|
Ok
|
