Print Report | Back to Sample Detail

Sample Record for 2024-09-13-30

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000253 DEA: 070W4504 EFIS: 0722000060 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-138-50.0/63.7
Work Description: PLACE HMA (TYPE A) AND COLD PLANE ASPHALT CONCRETE PAVEMENT.
Location Description: LOS ANGELES COUNTY IN AND NEAR PALMDALE FROM 0.1 MILE SOUTH OF AVENUE S TO 0.1 MILE EAST OF 165TH STREET EAST
Contractor Name: CALMEX ENGINEERING, INC.
Contractor Address: Unknown
Resident Engineer: Ramy Beshara Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-09-13-30
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Production Start-Up
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/13/2024
Date that the sample was received by the laboratory/organization performing the testing: 09/17/2024
The quantity of what the sample constitutes: 14 BOXES WMA 4 QTS PG64-16 2 QTS EVO 2 BAGS ( WF, 3/8) 3 BAGS RAP
A brief description of the sample: 3/8 WMA SP R20 .25% EVO
From where was the sample collected: Manufacturer
Laboratory sample identification: 0476A-24
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: VULAN - PALMDALE

Material Information

HMA Type: Type A HMA
HMA Grading: 3/8 inch
Lot number:
Sublot number:
HMA Mix Number: 420911
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2024-09-13-30-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 12/11/2024
Date Tested: 09/18/2024
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7351.1 grams
Mass of oven-dry sample in air for Sample 1 1572 grams
Mass of container filled with the sample and water for Sample 1 8285.5 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.465
Theoretical maximum density at 25°C (77°F) 2457.9 kg/m^3

Test 2 of 4

DIME Test ID: 2024-09-13-30-2
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 12/11/2024
Date Tested: 12/11/2024
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Percent Air Voids 5.5 %
Percent Air Voids 2 5.3 %
Percent Air Voids 3 5.2 %
Average Percent Air Voids 5.3 %

Test 3 of 4

DIME Test ID: 2024-09-13-30-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 12/11/2024
Date Tested: 09/19/2024
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Bulk Specific Gravity 2.329
Bulk Specific Gravity 2 2.334
Bulk Specific Gravity 3 2.338
Average Bulk Specific Gravity 2.334

Test 4 of 4

DIME Test ID: 2024-09-13-30-4
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 12/11/2024
Date Tested: 09/18/2024
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 1310 g
Corrected Asphalt Binder Content 5.96 %
Mass Loss 82.2 g
Correction Factor (Percent by mass of HMA Specimen) 0.31 %
Moisture Content no data0 %
Temperature Compensation Factor 0.23 %
Test Temperature 538 C