Print Report | Back to Sample Detail

Sample Record for 2024-09-12-37

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000267 DEA: 070W6404 EFIS: 0722000357 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-2,134,170-Var
Work Description: METHACRYLATE, POLYESTER OVERLAY, SPILL REPAIR AND JOINT SEALS.
Location Description: LOS ANGELES COUNTY AT VARIOUS LOCATIONS
Contractor Name: TRUESDELL CORPORATION OF CALIFORNIA, INC.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-09-12-37
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Methacrylate
Sample Taken Date: 09/12/2024
Date that the sample was received by the laboratory/organization performing the testing: 09/12/2024
The quantity of what the sample constitutes: 100 Totes
A brief description of the sample: 2 pints 204, CHP, 8020
From where was the sample collected: Source
Laboratory sample identification: 000123KBP
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia

Material Information

Mfg. Lot Number(s): 24-90-191290
Batch number: 2490191290
Mix number: 2490191290

Test Results

Test 1 of 1

DIME Test ID: 2024-09-12-37-1
Test Method: CONCLP 4-16: HMWM
Verified Date: 10/04/2024
Date Tested: 10/03/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Tack free time accepted using vendor's results.
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity (ASTM D 2196) Brookfield RVT with UL adapter, 50 RPM @ 77 deg F, 25 max cps @ 77 deg F 24.5
Specific gravity (ASTM D 1475) 0.90 min @ 77 deg F 1.09
Volatile content (ASTM D 2369) 30% max 8.2
Flash point (ASTM D 3828) more than 180 deg F 180
PCC - SSD bond strength (CA Test 551) 500 psi minimum @ 24 hours 725
Tack free time, 400 minutes max 358

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2024-09-12-37-2CONCLP 4-16: HMWM10/18/202408/26/2025Bob ScottCT HQ - Sacramento Materials Management Branch Field Office
2024-09-12-37-3CONCLP 4-16: HMWM10/18/202410/19/2024Bob ScottCT HQ - Sacramento Materials Management Branch Field Office