Print Report | Back to Sample Detail

Sample Record for 2024-09-10-62

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 995291 DEA: 081N2504 EFIS: 0822000125 QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-15,60,91,215-Var
Work Description: POLYESTER CONC OVERLAY, CLEAN EXP JT, DECK SEAL & HMA (BRIDGE).
Location Description: RIVERSIDE COUNTY AT VARIOUS LOCATIONS
Contractor Name: PETERSON-CHASE GENERAL ENGINEERING CONSTRUCTION, INC.
Contractor Address: 16315 Construction Circle West, Irvine, CA 92606
Resident Engineer: Xavier Avila Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-09-10-62
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 09/10/2024
Date that the sample was received by the laboratory/organization performing the testing: 09/11/2024
The quantity of what the sample constitutes: 2 tankers
A brief description of the sample: 1 gallon can / PPC 1121 RESIN
From where was the sample collected: Source
Laboratory sample identification: 000122KBP
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia

Material Information

Mfg. Lot Number(s): AZ4H01378
Batch number: AZ4H01378
Mix number: AZ4H01378
Test results on following page(s): 6

Test Results

Test 1 of 6

DIME Test ID: 2024-09-10-62-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 09/27/2024
Date Tested: 09/26/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity 115

Test 2 of 6

DIME Test ID: 2024-09-10-62-2
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 09/27/2024
Date Tested: 09/26/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Density Units pounds/gallons
Liquid Density (pounds per gallon) 9

Test 3 of 6

DIME Test ID: 2024-09-10-62-3
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 09/27/2024
Date Tested: 09/16/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted Vendor's Results
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested 6
Conditioning procedure 18/25/50+5/70
Speed of testing 0.45 in/min
Sample 1 Width 0.485 in
Sample 1 Ultimate strength 3534 psi
Sample 1 Thickness 0.26 in
Sample 1 Area 0.1261 in^2
Sample 1 Ultimate Strength Actual 445.637 lbs
Sample 1 percent elongation 79.6 %
Sample 1 Time no data0 MM:SS
Sample 2 Width 0.484 in
Sample 2 Thickness 0.261 in
Sample 2 Area 0.1263 in^2
Sample 2 Ultimate strength 3204 psi
Sample 2 Ultimate Strength Actual 404.665 lbs
Sample 2 percent elongation 71.5 %
Sample 2 Time no data0 MM:SS
Sample 3 Width 0.486 in
Sample 3 Thickness 0.263 in
Sample 3 Area 0.1278 in^2
Sample 3 Ultimate strength 3002 psi
Sample 3 Ultimate Strength Actual 383.656 lbs
Sample 3 percent elongation 61 %
Sample 3 Time no data0 MM:SS
Sample 4 Width 0.485 in
Sample 4 Thickness 0.261 in
Sample 4 Area 0.1266 in^2
Sample 4 Ultimate strength 2986 psi
Sample 4 Ultimate Strength Actual 378.028 lbs
Sample 4 percent elongation 61 %
Sample 4 Time no data0 MM:SS
Sample 5 Width 0.484 in
Sample 5 Thickness 0.251 in
Sample 5 Area 0.1215 in^2
Sample 5 Ultimate strength 3069 psi
Sample 5 Ultimate Strength Actual 372.884 lbs
Sample 5 percent elongation 66.5 %
Sample 5 Time no data0 MM:SS
Sample 6 Width 0.485 in
Sample 6 Thickness 0.262 in
Sample 6 Area 0.1271 in^2
Sample 6 Ultimate strength 3403 psi
Sample 6 Ultimate Strength Actual 432.521 lbs
Sample 6 percent elongation 76.6 %
Sample 6 Time no data0 MM:SS
Ultimate Strength Average 3200 psi
Percent Elongation Average 69 %

Test 4 of 6

DIME Test ID: 2024-09-10-62-4
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 09/27/2024
Date Tested: 09/26/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Mean of two volatile content determination 46.5

Test 5 of 6

DIME Test ID: 2024-09-10-62-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 09/27/2024
Date Tested: 09/17/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted Vendor's Results
Test Result Compliance: complies
Additional Comments When Verified:
Curing history for Sample 1 24hr
Maximum applied load (P) for Sample 1 1451.96 lb
Span length for Sample 1 9 in
Break location for Sample 1 bond
Specimen defects/notes for Sample 1 no data
Surface type for Sample 1 SSD
Modulus of rupture (R) for Sample 1 725.981 psi
Curing history for Sample 2 24hr
Maximum applied load (P) for Sample 2 1427.18 lb
Span length for Sample 2 9 in
Break location for Sample 2 bond
Specimen defects/notes for Sample 2 no data
Surface type for Sample 2 SSD
Modulus of rupture (R) for Sample 2 713.589 psi
Curing history for Sample 3 24hr
Maximum applied load (P) for Sample 3 1426.49 lb
Span length for Sample 3 9 in
Break location for Sample 3 bond
Specimen defects/notes for Sample 3 no data
Surface type for Sample 3 SSD
Modulus of rupture (R) for Sample 3 713.246 psi

Test 6 of 6

DIME Test ID: 2024-09-10-62-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 09/27/2024
Date Tested: 09/12/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted Vendor's Results
Test Result Compliance: complies
Additional Comments When Verified:
Diameter of lid 153.9 mm
Room Temperature 77 f
Tare weight no data
Initial weight 100.07 grams
Weight at 5 minutes 100.009 grams
Weight at 10 minutes 99.944 grams
Weight at 15 minutes 99.881 grams
Weight at 20 minutes 99.817 grams
Weight at 25 minutes 99.76 grams
Weight at 30 minutes 99.693 grams
Final weight 99.69 grams
Total weight loss 0.38 grams
Calculated radius of gallon can lid in cm 7.695 cm
Lid Factor 53.757 m^2
Volatile emission 20.428 grams/m^2