Print Report | Back to Sample Detail

Sample Record for 2024-09-08-26

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000251 DEA: 042Y5004 EFIS: 0423000122 QA Service Level: 1
DIST-CO-RTE-PM: 04-NAP-221-0.2/1.7
Work Description: COLD PLANE ASPHALT CONCRETE PAVEMENT AND OVERLAY WITH RHMA-G.
Location Description: NAPA COUNTY IN AND NEAR NAPA FROM 0.2 MILE NORTH OF JUNCTION ROUTE 12/29 TO 0.2 MILE NORTH OF BASALT ROAD UNDERCROSSING
Contractor Name: A. TEICHERT & SON, INC. DBA TEICHERT CONSTRUCTION
Contractor Address: Unknown
Resident Engineer: Anai Cazares-Ramirez Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-09-08-26
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/08/2024
Date that the sample was received by the laboratory/organization performing the testing: 09/11/2024
The quantity of what the sample constitutes: LOT 1 SUBLOT 2
A brief description of the sample: 1/2"RHMA-G
From where was the sample collected: Source
Laboratory sample identification: Con_24_675
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Teichert Woodland Batch Plant

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number: 1
Sublot number: 2
HMA Mix Number: 30640542508P
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2024-09-08-26-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 09/16/2024
Date Tested: 09/10/2024
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test: Theoretical maximum density at 25°C (77°F)=2454.9
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Specific Gravity for Sample 1 2.462
Theoretical maximum density at 25°C (77°F) 24549 kg/m^3

Test 2 of 4

DIME Test ID: 2024-09-08-26-2
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 09/16/2024
Date Tested: 09/13/2024
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test: LOT 1 SUBLOT 2 Teichert Woodland Batch Plant
Test Result Compliance: does not comply
Additional Comments When Verified:
Percent Air Voids 92.6 %
Percent Air Voids 2 91 %
Percent Air Voids 3 91.5 %
Average Percent Air Voids 91.7 %

Test 3 of 4

DIME Test ID: 2024-09-08-26-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 09/16/2024
Date Tested: 09/13/2024
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test: LOT 1 SUBLOT 2 Teichert Woodland Batch Plant
Test Result Compliance: does not comply
Additional Comments When Verified:
Bulk Specific Gravity 2.281
Bulk Specific Gravity 2 2.241
Bulk Specific Gravity 3 2.253
Average Bulk Specific Gravity 2.258

Test 4 of 4

DIME Test ID: 2024-09-08-26-4
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/16/2024
Date Tested: 09/11/2024
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test: Teichert Woodland Batch Plant
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 1646.2 g
Corrected Asphalt Binder Content 7.25 %
Mass Loss 127.9 g
Correction Factor (Percent by mass of HMA Specimen) 0.34 %
Moisture Content no data0 %
Temperature Compensation Factor 0.18 %
Test Temperature 538 C